[激励器沉浸式插件]Red Rock Sound Exciter v2.0.3 [WiN]（13Mb）

Exciter Immersive
The Red Rock Sound Exciter will allow you to improve and enhance sonic quality of signal more naturally than with equalization. Unlike traditional EQ that just turns up the existing harmonics, Exciter generates additional harmonics, therefore there is no boost in the output signal level, this maintains a clear and balanced sound.

The Exciter extends the features of the original hardware and joins the flexibility of the digital world to the character of the analog processing. The Exciter plugin designed from the ground
up for fast, efficient work on mid/side, stereo and the objects, the beds (fixed channels) of immersive mixing environments.

Units
This module allows you to select an Exciter from four available. The Exciter are arranged in series, this allows you to process channels with different Exciter settings.
For example: the first Exciter is only the mid channel, the second Exciter is only the side channel, the third Exciter is the left and right channel. For multi-channel modes: the first Exciter is only the left and right channels, the second Exciter is the center channel, the third Exciter is the LFE, etc.

You can rename Unit Buttons for ease of use. To rename the selected Unit button, right-click on the button.

In order to turn on the solo (listen) of the Exciter, double-click on the selected unit number. The Exciter in solo mode glows yellow, to exit solo mode, double-click again. For two-channel modes, only one Exciter can be solo mode. For multi-channel modes, one or more Exciter can be soloed.
To bypass Exciter processing, press the selected unit number one click + shift. In bypass mode, the button will glow red.

You can also copy all Exciter settings to another unit. To do this, select the Exciter from which you want to copy the settings, then click on the copy button, then select the Exciter to which you want to copy the settings.

Input Routing
Input Routing lets you choose between 44 common channel setups, starting from Stereo up to 7.1.4 and 9.1.6. Simply select in the input routing module the channel setup that fits your track.

You can also create your own input routing profiles. 16 independent channels are available.

Click on the edit button next to the input routing selection display. Hold down the shift button and select the desired number of channels. Name selected channels in order. Then click save and name the profile.

Channels Selection
In this module, you can select (activate) the channels that the Exciter (unit) will process.

from nfo:

(64-bit: VST2, VST3, AAX)
(32-bit: VST2, VST3)

https://redrocksound.pro/en/exciter-pc/

Use installer and replace with patched.

BUBBiX